How To Clean TDX-500 Vacuum Cleaner Filter Screen And Dust Cup?

How to clean TDX-500 vacuum cleaner filter screen and dust cup?

Filter screen cleaning

In general, the filter screen of the road vacuum cleaner needs to be cleaned regularly to ensure its filtering effect and vacuuming performance. When cleaning the filter, it is usually necessary to follow the following steps:

1. Turn off the vacuum cleaner and unplug it to ensure safety.

2. To take out mesh from the vacuum cleaner, pay attention to the gentle, to avoid damage.

3. On the advice of the filter material and specifications, select the appropriate cleaning method. For example, for filters using filter paper as filter media, you can gently brush the dust on the filter paper with a soft brush; For the filter screen with flannelette as the filter medium, it should be cleaned with cold water and then dried.

4. After cleaning, the filter needs to be dried naturally in a cool and ventilated place to avoid exposure to the sun or drying, so as not to affect the performance and life of the filter.

Dust cup cleaning

The dust cup is the part of the vacuum cleaner used to collect dust and debris, and also needs to be cleaned regularly. When cleaning the dust cup, you can follow these steps:

1. Press the dust removal switch of the dust collecting cup of the vacuum cleaner to clean up the dust and debris in the cup.

2. The dust cup separated from the body, are attached to the body with the brush or wet cloth clean the dust and fluff.

3. Rinse cup of dust and dry again after the same back.